WINCH REQUEST FOR QUOTATION FORM:

PLEASE PROVIDE YOUR CONTACT INFORMATION:

Application TOWING ESCORT ANCHOR HANDLING MOORING TUGGER WINCH DRY DOCK HAULING

Type of line WIRE ROPE SOFT LINE

Line diameter   IN MM or Line circumference   IN MM

Drum capacity   FEET METERS

Automatic spooling mechanism /level wind  YES NO

Clutch: DIRECT DRIVE - NO CLUTCH "JAW" TYPE CLUTCH - MANUALLY OPERATED "JAW" TYPE CLUTCH - HYDRAULICALLY OPERATED

Warping head: NONE ONE - PORT SIDE ONE - STARBOARD SIDE ONE PORT - ONE STARBOARD

Warping head diameter: inches mm

Line diameter: inches mm

POWER REQUIREMENTS:

Line pull required  Lbs Kg @ fpm m/min on the FIRST SECOND THIRD FOURTH FIFTH MID-LAYER TOP LAYER layer

Maximum or stall pull required   Lbs Kg

BRAKE REQUIREMENTS:

Motor-brake YES NO

Motor-brake holing capacity Lbs Kg

Brake-band  YES HAND-WHEEL OPERATED HYDRAULICALLY OPERATED NO -

Brake-band holing capacity Lbs Kg on the FIRST SECOND THIRD FOURTH FIFTH MID-LAYER TOP LAYER layer

DRIVE REQUIREMENTS:

Type of drive HYDRAYULIC PTO ELECTRIC

If hydraulic drive:

Hydraulics available: GPM L/MIN @ PSI BAR

Hydraulic power unit: NOT REQUIRED ELECTRIC MOTOR DRIVEN DIESEL ENGINE DRIVEN GAS ENGINE DRIVEN

Hydraulic control valve: NOT REQUIRED 4-WAY VALVE

If electric drive:

Voltage N/A 110 115 220 230 440 460 480 Phase N/A 1 3 Frequency 50 N/A 60

CONTROL REQUIREMENTS:

Electric controls  NOT APPLICABLE SINGLE SPEED ELECTRIC CONSTANT TENSION TWO SPEED VARIABLE SPEED

Hydraulic controls NOT APPLICABLE SINGLE SPEED TWO SPEED

Abort / free-wheeling system NOT REQUIRED REQUIRED

Comments

TOP OF PAGE